75
Hard Freeze Warning – Protect Your Pool
With the temperatures that we are expecting this weekend, it is important that your pool equipment is prepared to handle IT.
Most pool equipment in the Denton area has been programmed so that the pumps are switched on by a freeze sensor when the ambient air temperature approaches freezing, but it is still important to make sure. Following is what you need to be looking for:
Main pump—The main pump should definitely be operating when the temperature is freezing. This helps prevent damage to other components as well—such as the filter, heater, etc.
Booster pump (for automatic cleaners)—The booster pump does not need to be operating, since water from the main pump is circulating thru the booster pump.
Pumps for waterfalls, fountains, spa jets, etc.—Pumps for waterfalls, fountains, spa jets, etc. should either be operating or should be drained. Some might be on a freeze sensor, therefore if these pumps are drained the freeze sensors need to be deprogrammed.
If temperatures reach the single digits or will be under freezing for an extended period of time, oftentimes extra precautions must be taken. If that is the case, please contact us and we will be glad to advise you on how to avoid freeze damage. Should you have any questions concerning winter pool care, please feel free to give us a call at (940) 384-7665.